View the manual for the Viper Model 5305V here, for free. This manual comes under the category remote controllers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Viper Model 5305V or do you need help?Ask your question here
The Viper Model 5305V is a remote controller designed for car security systems. This remote controller allows users to arm, disarm, and control the various functions of their car's security system from a distance. The compact and lightweight design of the Viper Model 5305V makes it easy to carry and use. The Viper Model 5305V is equipped with a range of features that ensure the security and safety of your vehicle. It has a sophisticated alarm system that will alert you if someone tries to break into your car or if there are any other unauthorized activities detected. Additionally, it has features such as a shock sensor, which will trigger the alarm if the car is jolted or moved forcefully. The remote controller also comes with a panic mode, which allows you to activate the alarm and attract attention in case of an emergency. This feature can be especially useful in situations where you feel threatened or unsafe. With its simple and intuitive interface, the Viper Model 5305V is easy to use. The remote controller features clearly marked buttons for each function, making it easy to navigate and control the security system. It also has a range of up to 1,500 feet, ensuring that you can control your car's security system from a distance. Overall, the Viper Model 5305V is a reliable and convenient remote controller for car security systems. With its range of features and user-friendly design, it provides peace of mind and added security for your vehicle.
General
| Brand | Viper |
| Model | Model 5305V |
| Product | remote controller |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Viper Model 5305V below.
A battery in my remote controller has started to corrode. Is the device still safe to use?
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
How do I program my Viper Model 5305V remote controller to work with my car?
To pair your Viper Model 5305V remote controller with your car, start by putting the key in the ignition and turning it to the on position. Then, within five seconds, press and hold the Function button on the remote controller until the parking lights flash once. Your remote controller is now programmed with your car.
What should I do if the remote controller's range seems to be decreasing?
If you notice a decrease in the range of your Viper Model 5305V remote controller, try replacing the battery with a fresh one. Low battery power can affect the signal strength. If the issue persists, ensure that there are no obstructions between the remote controller and the car, as this too can affect range.
How can I enable the remote start feature on my Viper Model 5305V?
To enable the remote start feature on your Viper Model 5305V, press the Function button twice, followed by the remote start button. Within five seconds, your car's engine should start. Please note that this feature must be installed and properly connected in your vehicle for it to work.
What should I do if my remote controller is not responding to button presses?
If your Viper Model 5305V remote controller is not responding to button presses, the first thing to check is the battery. Ensure that the battery is properly inserted, and if needed, replace it with a new one. If the problem persists, try resyncing the remote controller with your car by following the programming steps mentioned in the manual.
How can I adjust the sensitivity of the shock sensor on my Viper Model 5305V?
To adjust the shock sensor sensitivity on your Viper Model 5305V, press and hold both the Function button and the Shock/Disarm button simultaneously for at least two seconds. The parking lights will flash to indicate the current sensitivity level. Release both buttons, and then press the Shock/Disarm button the number of times corresponding to your desired sensitivity level (number of flashes).
Is the manual of the Viper Model 5305V available in English?
Yes, the manual of the Viper Model 5305V is available in English .
Is your question not listed? Ask your question here
 WEB-DL [Hindi (ORG 5.1) & English] 1080p 720p & 480p [x264/10Bit-HEVC] | [ALL Episodes] | Amazon Series)